Concrete Driveway and Patio Cost in Brentwood, CA

Planning ranges for concrete driveways, patios, stamped concrete and repairs, with the math for common sizes. The ranges are wide on purpose: the price for your property comes from a written quote after the site is measured.

Short answer

Plan on roughly $6 to $25+ per square foot for a poured concrete driveway, $4 to $20+ for a plain patio or walkway and $8 to $25+ for stamped concrete. A 20x20 driveway (400 sq ft) can land anywhere from about $2,400 to $10,000+, before removing an old slab. Thickness, base work, finish, access and slope decide where your project falls.

Planning ranges, not quotes. These ranges are deliberately wide and are built from published national and Bay Area figures (sources below). Your price depends on measurements and site conditions and is set in a written quote.

Price per square foot by job

Concrete planning ranges per square foot
JobPlanning range per sq ft
Concrete driveway, broom finish$6 to $25+
Concrete patio or walkway, plain$4 to $20+
Exposed aggregate$7 to $25+
Stamped or decorative concrete$8 to $25+
Removing an old slab$1 to $6+
Resurfacing overlay$3 to $20+

Worked examples: patios

Area is length times width. A 20x20 patio is 20 × 20 = 400 square feet.

Concrete patio planning ranges by size
Patio sizeAreaPlain concreteStamped
10x10100 sq ft$400 to $2,000+$800 to $2,500+
12x12144 sq ft$600 to $3,000+$1,200 to $4,000+
20x20400 sq ft$1,600 to $8,000+$3,200 to $10,000+
15x30450 sq ft$1,800 to $9,000+$3,600 to $11,500+

Worked examples: driveways

A two-car 20x20 driveway is 400 square feet; a 24x24 is 576. Long driveways assume a 10-foot width, which is an assumption, not your measurement.

Concrete driveway planning ranges by size
DrivewayAreaPlanning range
20x20 two-car400 sq ft$2,400 to $10,000+
24x24 two-car576 sq ft$3,500 to $14,500+
20x40800 sq ft$4,800 to $20,000+
100 ft long1,000 sq ft$6,000 to $25,000+
200 ft long2,000 sq ft$12,000 to $50,000+
300 ft long3,000 sq ft$18,000 to $75,000+

Small jobs cost more per square foot because setup, forms and delivery don't shrink with size. Long driveways depend heavily on access, grade and drainage.

What moves the price

  • Size. More square feet means a higher total, though small jobs cost more per square foot.
  • Removing the old surface. Breaking out and hauling away an old slab adds roughly $1 to $6+ per square foot.
  • Thickness and reinforcement. A driveway for standard vehicles should be at least 4 inches thick, 5 to 6 inches for heavy ones; rebar adds roughly $1 to $3+ per square foot.
  • Finish. Broom, exposed aggregate, colored and stamped finishes differ in price and upkeep.
  • Access, slope and drainage. Tight access, steep grades and drainage fixes add labor.
  • Permits. In Brentwood, work on the driveway apron, curb or sidewalk needs a city encroachment permit; fees vary.

What a complete quote lists

  • Demolition and haul-off
  • Base preparation
  • Thickness and reinforcement
  • Finish and color
  • Sealing
  • Permits, if any
  • Warranty terms

More detail on each line is in what a good concrete quote includes.

DIY versus hiring it out

Pouring concrete is physical and unforgiving. Mistakes with base, joints or finishing are expensive to undo. If you consider DIY, factor in tools, delivery, disposal and time.

Repair costs

If your concrete is damaged but not failed, repair or resurfacing may cost less than replacement. See the repair and resurfacing guide.

Thinking about pavers?

Pavers have their own cost drivers. See the paver cost guide, or the concrete vs pavers comparison.

Sources

Common questions

How much does a 20x20 concrete driveway cost?

A 20x20 driveway is 400 square feet. Plan on roughly $2,400 to $10,000+, depending on thickness, base work, finish and whether an old slab has to come out first. A written quote after measuring gives the actual price.

How much should stamped concrete cost?

Plan on roughly $8 to $25+ per square foot installed, more than plain concrete because of the patterning, color and sealer. Pattern, color and site prep decide where a project falls.

What is the average cost of concrete per square foot in California?

There is no single California average. For planning, poured concrete flatwork runs roughly $4 to $25+ per square foot installed, and Bay Area projects often land toward the upper half of that range.

Does the price include removing the old concrete?

Not always. Removal and haul-off can add roughly $1 to $6+ per square foot, so check that it is listed in your quote.

Get a price for your project

The ranges on this page are for planning. For a real number, request a quote: a local concrete pro can measure and give you a written price.

  1. Send the short form or call. Project type, rough size and your city are enough.
  2. Talk it through. A local concrete and paver pro calls to ask a few questions about the job.
  3. Get a written quote. After measuring, the contractor gives you a written price. No obligation to hire.

Request a quote

Five quick fields, about 30 seconds.

No obligation. Your details go only to a local pro who can quote your project. Privacy

Call nowRequest a quote