Paver Patios and Walkways in Brentwood, CA
Paver patios and walkways offer pattern, color and a repairable surface. Here are the materials, the base and the costs to expect.
Short answer
A paver patio is individual units on bedding sand over a compacted base, so a damaged area can be lifted and reset. For planning, installed paver patios run roughly $8 to $45+ per square foot, and industry guidance calls for at least 4 inches of compacted base under patios on well-drained soil (CMHA).

Patios and walkways
Paver patios and walkways carry foot traffic, furniture and the occasional grill, so they use a lighter base than a driveway. For vehicle areas, read the paver driveways page.
Materials
Concrete pavers are the most common and usually the least expensive. Clay brick, natural stone, travertine and porcelain are chosen for look or feel and typically cost more per unit (HomeGuide).
Patterns and borders
Running bond, herringbone and basketweave are common patterns, and a border or soldier course can frame the edge. More complex patterns and more cuts add labor. HomeGuide notes that pattern complexity and cuts increase labor cost (HomeGuide). Manufacturer swatches help you compare colors before you decide.
Base, edging and drainage
HomeGuide lists 4 to 6 inches of base for pedestrian areas (HomeGuide). The base material, compaction, edge restraint and slope away from the house all matter. Edge restraints keep the pavers from spreading over time.
Sealing and joint sand
Joint sand locks the pavers together and may need topping up over time. Sealing is optional. Sealing runs roughly $1 to $4+ per square foot. Whether it is worth it depends on the paver and on upkeep to expect.
Add-ons
Seat walls, steps and fire features are separate jobs a contractor may quote. We cover pavers and concrete flatwork only, so any add-on should be priced as its own line.
What it costs
For planning: roughly $800 to $4,500+ for a 10x10, $1,200 to $6,500+ for a 12x12 and $3,200 to $18,000+ for a 20x20 paver patio. Material, pattern, base depth and access decide where yours falls. The paver cost guide shows more sizes.
Before you request quotes
- Measure the area or give a rough size
- Decide patio, walkway or both
- Make sure your quote lists base depth, paver type and thickness, and edging
- Check licenses at cslb.ca.gov
Sources
- HomeGuide — Paver Patio Cost (Sep 18, 2024)
- HomeGuide — Pavers Cost Per Square Foot (Apr 24, 2023)
- HomeGuide — Cost of Pavers vs. Concrete (May 30, 2025)
- Ridgeline Outdoor Living — Paver Patio Cost in California (Los Angeles-area contractor guide) (Apr 25, 2026)
- Concrete Masonry & Hardscapes Association — Construction of Interlocking Concrete Pavements (PAV-TEC-002) (accessed Oct 2026)
Common questions
How much does a 20x20 paver patio cost?
For planning, a 20x20 (400 sq ft) paver patio runs roughly $3,200 to $18,000+, depending on the paver, pattern, base depth and access. A written quote after measuring gives the actual price.
Is it cheaper to do a paver patio or concrete?
Concrete is usually cheaper up front: roughly $4 to $20+ per square foot for a plain patio against $8 to $45+ for pavers. Pavers can be repaired one unit at a time.
How deep should the base be for a paver patio?
HomeGuide lists 4 to 6 inches for pedestrian areas such as patios and walkways. Clay soil can call for more.
Do paver patios need sealing?
Sealing is optional and adds cost and upkeep, roughly $1 to $4+ per square foot. Whether it makes sense depends on the paver type and sun exposure.
Request a concrete or paver quote
Tell us what you're planning. You'll get a call back to talk through the project and set a time to measure.
- Send the short form or call. Project type, rough size and your city are enough.
- Talk it through. A local concrete and paver pro calls to ask a few questions about the job.
- Get a written quote. After measuring, the contractor gives you a written price. No obligation to hire.