Paver Patio and Driveway Cost in Brentwood, CA
Planning ranges for paver patios, walkways and driveways, with the math for common sizes. The ranges are wide on purpose: the price for your property comes from a written quote after the site is measured.
Short answer
Plan on roughly $8 to $45+ per square foot for an installed paver patio or walkway and $10 to $45+ for a paver driveway, which needs a deeper base. A 20x20 patio (400 sq ft) can run about $3,200 to $18,000+. Paver type, pattern, base depth and access decide where your project falls.
Planning ranges, not quotes. These ranges are deliberately wide and are built from published national and California figures (sources below). Your price depends on measurements and site conditions and is set in a written quote.
Price per square foot
| Job or material | Planning range per sq ft |
|---|---|
| Paver patio or walkway, installed | $8 to $45+ |
| Paver driveway, installed | $10 to $45+ |
| Excavation or removal of an old surface | $1 to $6+ |
| Sealing (optional) | $1 to $4+ |
Worked examples: patios
Area is length times width. A 20x20 patio is 20 × 20 = 400 square feet.
| Patio size | Area | Planning range |
|---|---|---|
| 10x10 | 100 sq ft | $800 to $4,500+ |
| 12x12 | 144 sq ft | $1,200 to $6,500+ |
| 16x20 | 320 sq ft | $2,600 to $14,500+ |
| 20x20 | 400 sq ft | $3,200 to $18,000+ |
Worked examples: driveways
| Driveway | Area | Planning range |
|---|---|---|
| 20x20 two-car | 400 sq ft | $4,000 to $18,000+ |
| 24x24 two-car | 576 sq ft | $5,800 to $26,000+ |
| 1,000 sq ft | 1,000 sq ft | $10,000 to $45,000+ |
What moves the price
- Excavation and base depth. Driveways need a deeper compacted base than patios, and clay soil can call for more. Deeper bases take more material and labor.
- Paver type. Concrete, clay brick, natural stone, porcelain and permeable pavers differ in cost.
- Pattern and borders. Herringbone, curves and borders mean more cuts and more labor.
- Edging and drainage. Edge restraint, grading and slope away from the house are part of a sound install.
- Access and delivery. Backyards without equipment access take longer.
- Sealing. Optional, roughly $1 to $4+ per square foot.
What a complete quote lists
- Excavation and haul-off
- Base material and depth
- Paver type and thickness
- Pattern, border and edging
- Joint sand and sealing
- Drainage and slope
- Warranty terms
More detail on each line is in what a good paver quote includes.
Pavers vs concrete: the cost view
Pavers cost more up front than plain concrete and can be repaired one unit at a time. Read the full concrete vs pavers guide or the concrete cost guide.
See also: paver driveways and paver patios.
Sources
- HomeGuide — Paver Patio Cost (Sep 18, 2024)
- HomeGuide — Pavers Cost Per Square Foot (Apr 24, 2023)
- HomeGuide — Cost of Pavers vs. Concrete (May 30, 2025)
- Ridgeline Outdoor Living — Paver Patio Cost in California (Los Angeles-area contractor guide) (Apr 25, 2026)
Common questions
How much should a 20x20 paver patio cost?
A 20x20 patio is 400 square feet. Plan on roughly $3,200 to $18,000+, depending on the paver, pattern, base depth and access. A written quote after measuring gives the actual price.
How much does it cost to install 1,000 square feet of pavers?
For planning, about $8,000 to $45,000+ for a patio-grade install, and more for a driveway, which needs a deeper base.
Is it cheaper to do a paver patio or concrete?
Usually concrete is cheaper up front: roughly $4 to $20+ per square foot for a plain patio against $8 to $45+ for pavers. Pavers can be repaired one unit at a time.
Why do paver prices vary so much?
Paver type, thickness, pattern, cuts, base depth, drainage and access all change the labor and material. Two patios of the same size can be priced very differently.
Get a price for your project
The ranges on this page are for planning. For a real number, request a quote: a local paver pro can measure and give you a written price.
- Send the short form or call. Project type, rough size and your city are enough.
- Talk it through. A local concrete and paver pro calls to ask a few questions about the job.
- Get a written quote. After measuring, the contractor gives you a written price. No obligation to hire.